86822

User Manual - Fish Tube

Introduction

To make correct use of the functions and to know the system’s connections and usage, please read this user manual carefully before using the product. Keep this manual in a safe place for future reference.

Getting started

1. Ensure that the lamp is not connected to a USB cable or adapter before pouring water into the tube.
2. Pour water into the tube. Stop pouring 2 cm (1 inch) below the top.
3. Place the fish in the tube and stir with a stick to remove any bubbles. If small air bubbles continue to form on the fish, dip the fish in vinegar to degrease them.
4. This product is powered by a USB power source (maximum 5W). Connect the USB cable to the product and then turn on the lamp.
   

Remote Control

1. On
2. Off
3. Increase light intensity
4. Decrease light intensity
5. RGBW color
6. Mix colors
7. Flash
8. Strobe
9. Fading effect
10. Smooth effect
    

Care and Maintenance

• Always fill the tube with cooled boiled water. This will keep the water clear for the longest time.
• Change the water if there are impurities in it. Carefully remove any dirt on the walls and bottom of the tube with a soft brush.
• If a fish is floating upside down or stuck to the bottom, gently tap the tube or move the fish with a straw.
• If the fish stop moving after a while, change the water in the tube.
• Do not leave the lamp on for more than 6 hours a day for optimal lifespan.

Warnings

• Do not ingest the fish or other small parts.
• The lamp is for indoor use only.
• Keep out of direct sunlight.
• Always place the product on a flat surface to prevent spillage.
• Not suitable for children under 5 years of age.
• This product is suitable for USB adapters up to 5 watts. USB power sources with a higher power rating than 5 watts (such as fast chargers) may damage the product. 

Specifications

• Power: 0.54 Watt
• Product material: ABS plastic
• Power supply mode: AA battery
• Product size: 110 x 110 x 800 mm

Contents

• 1 x Lamp
• 1 x USB cable
• 5 x Fish
• 1 x User manual